Often the entry doors of the homes are installed with the extra room inside with a storm door. The storm doors are really helpful in protecting the entry door from any damage or weathering. Besides, these doors also assist in increasing the insulation and security of any home. These doors close automatically, but the majority of the storm doors comes with the auto locking mechanism.
So, it is important not to leave the door ever fixed in the open position as the heavy winds can damage the door. But still if your storm door has damaged, then you need to repair storm door as early as possible to ensure the safety. The common problems of these doors are the metal frames come loose, the molding of the doors loosens, the door scraps against another part of the frame or the door sags.
In this blog you will learn about the necessary steps to repair the storm door by your own. Take a look:
- Before grabbing the tools, open the door from outside and then push up and down the door. Then check the hinge side of the frame of the door. In case the molding moves, then secure the door with some extra nails. Then start adding some nails near the upper part of the wood trim.
- After that, add some nail further in the bottom part if needed. Sink the nailheads a little with the nail set and cover the nailheads with the acrylic caulk and then touch up the molding with the paint.
- In case the metal frame of the door comes loose, then purchase some pan head screws to fix the frame. Stainless steel made screws are the best choice. Then stick a shim between the frame and the door and tight the existing screws and drill some new screw holes through the door frame. After that, press a little to drill the metal. You don’t need to drill the wooden frame. In the majority of the cases, two or three screws added in the upper section of the door would do the job perfectly.
Want more information about repairing a door? Then you can contact with www.doorwindowrepairs.com